Sparky Rear Baffle, Made in New Zealand.

Wagener Sparky – Baffles

The Baffles are to be positioned in the “ceiling” of the firebox.

1. Place the rear baffle in first with the two holes closest to the Sparky door.
2. Position tight against the rear wall and it should be sitting on an angle of about 40 degrees. (Very Important its hard against the back wall with no gap)
3. The angle strengtheners should be facing downwards and running from left to right as pictured below.
4. Place the front baffle into the fire and lock the two bolts through the two holes of the rear baffle.
5. This can take a little jiggling.